View LTE052T-060_137814.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Philips Flat Display Systems Active matrix 5" color TFT LCD module
Product Specification LTE052T-060
www..com
LTE052T-060 Active matrix 5" color TFT LCD Module
Product Specification March 30th 2000
Philips Flat Display Systems
-1-
Philips Flat Display Systems Active matrix 5" color TFT LCD module
Product Specification LTE052T-060
www..com
CONTENTS
1 2 3 4 4.1 5 5.1 5.2 6 7 7.1 7.2 7.3 7.4 7.5 7.5.1 7.5.2 7.6 7.7 7.8 8 8.1 8.2 8.3 8.4 8.5 9 9.1 9.2 9.3 9.4 9.5 10 11 GENERAL DESCRIPTION FEATURES APPLICATIONS QUICK REFERENCE DATA Block diagram MECHANICAL DATA Dimensions Electrical connectors PINNING ELECTRICAL CHARACTERISTICS Limiting values Recommended operating condition module Recommended operating condition backlight Characteristics Input and output timing Displayed lines (PAL mode) Displayed lines (NTSC mode) External clock Backlight dimming Power on/off sequences OPTICAL DATA Optical characteristics Pixel organization Contrast ratio Response time Viewing angle ENVIRONMENTAL DATA Environmental tests Mechanical tests Electrostatic discharge Electromagnetic compatibility (EMC) Safety HANDLING AND SAFETY REQUIREMENTS MOUNTING DEFINITIONS
12
LIFE SUPPORT APPLICATIONS These products are not designed for use in life support applications, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Philips Flat Display Systems customers using or selling these products for use in such applications do so at their own risk and agree to fully identify Philips Flat Display Systems for any damages resulting from such improper use or sale
-2-
Philips Flat Display Systems Active matrix 5" color TFT LCD module
Product Specification LTE052T-060
w w w . D
1 GENERAL DESCRIPTION This is an active matrix LCD module Which comprises xA A 5" color TFT panel xA Panel driver electronics xA Integrated backlight xA Integrated interface card The 5" active area has full color capability using 320 (xRGB) x 234 pixels. The panel has a 4:3 aspect ratio and a wide viewing angle. The module can withstand intense Environmental conditions Outline dimensions compatible with double DIN size for automotive use. 2 FEATURES
xA xA
3 APPLICATIONS
xA xA xA xA
Car navigation TV and DVD monitors Video games Automation and process control monitors.
4 QUICK REFERENCE DATA PARAMETERS
Overall dimensions Width Height Depth Active area dimensions Width Height Display resolution Pixel dimensions: Horizontal Vertical Pixel configuration Supply voltage (module) Power consumption (without inverter) Backlight life at 25C; I lamp = + 6.0 mA (RMS) Continuous operation Typical viewing angle (contrast ratio >5) Horizontal right Horizontal left Vertical up Vertical down Maximum operating ambient temperature Operating panel surface temperature range Storage temperature range Typical response time: Rise time Fall time Mass of the module
VALUE
126.9 89.6 13.1
UNIT
mm mm mm
102.70 74.76 320x234
mm mm pixels
3x0.107 0.319 RGB stripe 8 to 16 1.2 min. 10000
mm mm
xA
xA
xA xA xA xA xA xA xA xA xA xA
RGB stripe configuration Two analog RGB with Hsync and Vsync inputs Two analog RGB channels with possibility of picture in picture. ( C) VBS for synchronisation or Hs Vs with CLK signal Selectable NTSC/PAL (RGB) Up/down and left/right control signals Display aspect ratio 4 : 3 Display resolution 234 lines High contrast TFT LCD drive system High speed response High brightness Wide viewing angle Integrated high efficiency backlight Extended temperature range.
Volt W hours
70 70 50 70 70 -30 to +85 -40 to +90
deg deg deg deg C C C
30 15 183 +/- 10
ms ms g
-3-
Philips Flat Display Systems LTE052T-060
Product Specification
Active matrix 5" color TFT LCD module
4.1 BLOCK DIAGRAM (fig. 1)
www..com
4.1
diagram
-4-
Philips Flat Display Systems LTE052T-060
Product Specification
Active matrix 5" color TFT LCD module
5 MECANICAL DATA (fig. 2)
-5-
www..com
A
Philips Flat Display Systems Active matrix 5" color TFT LCD module 5.1 Dimensions PARAMETER Display format Active area Screen size (diagonal) Pixel pitch: Horizontal vertical Dot configuration Overall dimensions (excluding connectors) Width Height Depth Mass of the module
Product Specification LTE052T-060
www..com
VALUE (320x3) x 234 102.7 x 74.8 127 5.0 3x 0.107 0.319 RGB stripe 126.9 +/- 0.2 89.6 +/- 0.2 13.1 +/- 0.5 183 +/- 10
UNIT dots mm mm inch mm mm
mm mm mm g
5.2
Electrical connectors NUMBER OF PINS 22 2 MATING CONNECTOR 22-pin flex foil ( 1mm pitch) SM02 (8.0)B-BHS 1- TB
SERVICE Interface Backlight
6
PINNING PIN 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 1 2 I/O I/O I/O O I I I I I I I I I I I I I I I I I I DESCRIPTION Horizontal sync; notes 1 and 2 Vertical sync; notes 1 and 3 Synchronization signal for backlight PAL/NTSC control signal, note 8 Horizontal scanning direction; note 4 Vertical scanning direction note 5 RGB1/RGB2 video signal switching; note 6 Not connected Not connected Supply voltage VBS input for sync separator Brightness control Red video signal 1 Green video signal 1 Blue video signal 1 Not connected Red video signal 2 Green video signal 2 Blue video signal 2 Ground Change I/O direction of CLK, Hs and Vs; note 7 Clock signal Backlight input voltage Backlight ground connection
SYMBOL Analog interface Hs Vs PWM P/N HRV VRV Vsw n.c. n.c. VDD VBS BRT R1 G1 B1 n.c. R2 G2 B2 GND CLKC CLK Backlight Vin GND
-6-
Philips Flat Display Systems Active matrix 5" color TFT LCD module
Product Specification LTE052T-060
www..com
NOTES 1 2 3 4 5 6 7 8 CLKC= LOW: module is activated by CLK, Hs and Hs. CLKC = HIGH: Hs is output, synchronised to VBS signal CLKC = LOW: Hs is horizontal sync input. CLKC = HIGH: Vs is output, synchronised to VBS signal CLKC = LOW: Vs is vertical sync input. HRV = HIGH: image is normal HRV = LOW: image is reversed into horizontal direction. VRV = HIGH: image is normal VRV = LOW: image is reversed into vertical direction. Vsw = HIGH: RGB1 is selected Vsw = LOW: RBG2 is selected CLKC = HIGH : Hs and Vs become output mode CLKC = LOW: CLK, Hs and Vs become input mode P/N switching when not operating
7
ELECTRICAL CHARACTERISTICS
7.1 Limiting values In accordance with the Absolute Maximum Rating System (IEC 60134) Tamb = 25 C.; GND = 0V; unless otherwise stated SYMBOL Vdd V i (analog) V i (dig) V o (dig) DESCRIPTION Power supply voltage (pin 10) Analog input voltage (peak to value Digital input voltage Digital output voltage MIN> -0.3 -0.3 -0.3 -0.3 MAX. 20 5 5 5.3 UNIT V V V V
peak
7.2
Recommended operating conditions DESCRIPTION Power supply ; note 1 Ripple on supply voltage Analog input voltage:note 2 AC component (peak-to-peak value): - AC component video content (peak-to peak value), note 3 - DC component Brightness control VBS horizontal sync frequency NTSC PAL VBS horizontal sync pulse width NTSC PAL
f(Hs)
module CONDITIONS Within 200 ms Freq. > 400 Hz MIN. 7.8 0.7 -1.0 0 CLKC=HIGH 15.13 15.03 CLKC=HIGH 4.2 4.2 CLKC=HIGH CLKC=HIGH fH/284 fH/262 fH/258 Hz 0.5 s 4.7 4.7 5.2 5.2 s s 15.73 15.63 16.33 16.23 kHz kHz TYP 12.0 1.0 0.7 0 MAX 16.0 0.1 2.0 +1.0 5.0 UNIT V V
SYMBOL VDD VDD, ripple V i(a)
V V V V
BRT f Hs
t w (Hs)
t r(Hs), t f Vs
VBS horizontal sync pulse rise and fall times Vertical sync frequency NTSC -7-
Philips Flat Display Systems Active matrix 5" color TFT LCD module PAL
Product Specification LTE052T-060 fH/344 fH/312 fH/304 Hz www..com
Tw(Vs)
Tr(Vs), tf(Vs) Fclk Twh Twl
Tr(clk) Tf(clk) FHs Tw(Hs) Tr(Hs)t f (Hs) FVs Tw (Vs)) tsu1 tHO1 tSU2 tHO2
Vertical sync. Pulse width NTSC PAL Vertical sync pulse rise and fall times Input clock frequency Input clock pulse width HIGH Input clock pulse width LOW Input clock rise time Input clock fall time HSY input frequency HSY input pulse width HSY input pulse rise and fall times VSY input frequency VSY input pulse width VSY to HSY set-up time VSY to HSY hold time CLK to HSY set-up time CLK to HSY hold time
CLKC = HIGH 6.0 20 20 fclk/ 465 1 50 1H 1.0 1.0 25 25 3H 2.5H 6.8 fclk / 435 5 FHs/2 62 3H 0.5 7.6 10 10 fclk/ 405 9 0.05 FHs/ 258 5H -
CLKC = HIGH CLKC = LOW CLKC = LOW CLKC = LOW CLKC = LOW CLKC = LOW CLKC = LOW CLKC = LOW CLKC = LOW CLKC = LOW CLKC = LOW CLKC = LOW CLKC = LOW CLKC = LOW CLKC = LOW
s MHz ns ns ns ns kHz s s Hz
s s ns ns
NOTES 1 The module does not have load dump, under or over-voltage protection. 2 Applies to VBS input 3 Applies to VR1, VG1, VB1, VR2, VG2, and VB2.
7.3 Recommended operating conditions backlight Tamb = -30 to +85 C; relative humidity < 90% at 60 C. SYMBOL V L (rms) I L (rms) fL VIGS (rms ) DESCRIPTION CCFL tube voltage (RMS value) CCFL tube current (RMS Value) CCFL drive frequency Ignition voltage (RMS value): Tamb = 25 C Tamb = -30 C CONDITIONS Il(rms) = 6 mA Normal operation MIN. 530 5.5 20 TYP 580 6.0 1000 MAX 630 6.5 70 1700 UNIT V mA kHz V V
-8-
Philips Flat Display Systems Active matrix 5" color TFT LCD module
Product Specification LTE052T-060
www..com
7.4
Characteristics
GND = 0 V; Tamb = -30 to + 70 C; unless otherwise stated. SYMBOL DESCRIPTION CONDITIONS HS, VS, CLK, VSW VIH VIL HIGH-level input voltage LOW-level input voltage
MIN.
TYP.
MAX.
UNIT
3.5 1.5
V V
P/N, VRV, CLKC, HRV VIH VIL HIGH-level input voltage LOW-level input voltage 2.0 0.8 V V
HS, VS, PWM VOH VOL CLK VOL CLK, HRV IIH IIL HIGH-level input current LOW-level input current VI = + 5 V VI = 0V -0.1 +0.1 -4.5 A A HIGH-level output voltage LOW-level output voltage see note 1 LOW-level output voltage IOL = +4 mA 0.4 V IOH = -4 mA IOL = +4 mA 2.4 0.4 V V
HS, P/N, VS, VRV, CLKC IIH IIL VSW IIH HIGH-level input current LOW-level input current R1, G1, B1, R2, G2, B2, VSW, VBS CI input capacitance f = 1 MHz 28 pF VI = +5 V VI = 0 V +10 -600 A A HIGH-level input current LOW-level input current VI = +5 V VI = 0 V +10 -200 A A
P/N, HRV, VRV, CLK, PWM, HS, VS CI CLKC Cl input capacitance f = 1 MHz 10 nF input capacitance f = 1 MHz 37 pF
NOTE 1 At CLKC = HIGH, CLK = zero (internal clock mode)
-9-
Philips Flat Display Systems Active matrix 5" color TFT LCD module
Product Specification LTE052T-060
www..com
7.5
Input and output timing
SYMBOL tfield
DESCRIPTION field period: NTSC PAL
CONDITIONS
TYP.
UNIT
f field=60Hz f field=50Hz
16.67 20.0
ms ms
tline
line period: NTSC PAL 63.5 64.0 s s
f line
line frequency: NTSC PAL 15.73 15.625 1H H/2 4H 50.1 s kHz kHz
tDV1 tDV2 tVO tVID td(disp)
VS delay field 1 VS delay field 2 vertical pulse width video signal on-display time sync edge to start display delay time: NTSC PAL
10.6 11.1 50% level 50% level 1.4 1.2
s s s s
tpd(HS) tHO
sync edge to HS delay time horizontal pulse width
7.5.1 DISPLAYED LINES ( PAL MODE) Field 1 displayed line numbers: 27 to 298 Field 2 displayed lines numbers: 339 to 611
7.5.2 DISPLAYED LINES (NTSC MODE) Field 1 displayed line numbers: 23 to 256 Field 2 displayed lines numbers: 286 to 519
In PAL, on average, every seventh line is skipped. Actual lines skipped in field 1: 34 + 14N where N = 0,1 to 18 and 40 + 14M where M = 0,1 to 18. Actual lines skipped in field 2 344 + 14N where N = 0,1 to 18 and 350 + 14M where M = 0,1 to 18.
- 10 -
Philips Flat Display Systems Active matrix 5" color TFT LCD module
Product Specification LTE052T-060
www..com
Fig. 3 Input and output signals
- 11 -
Philips Flat Display Systems Active matrix 5" color TFT LCD module
Product Specification LTE052T-060
www..com
7.6
External clock
Fig. 4. Definition of line and pixel numbers
- 12 -
Philips Flat Display Systems Active matrix 5" color TFT LCD module
Product Specification LTE052T-060
www..com
7.7
Backlight dimming
PWM timing is only valid for standard PAL or NTSC synchronisation signal
Figure 5 Generated PWM signal for NTSC and PAL
7.8
Power
on/off sequences
Recommended sequence for power 1 2 Switch on the power supply Switch on the control signals
on:
Recommended sequence for power 1 2
off:
Switch off the control signals power supply Switch off the power supply
Power supply reset: If the power supply voltage VDD drops r 7.2V, the module switches off. The module will automatically switch on when the VDD increases above r 7.4V. Maximum transition time from 6.5 to 8 Volt is 500 msec.
- 13 -
Philips Flat Display Systems Active matrix 5" color TFT LCD module
Product Specification LTE052T-060
www..com
8 8.1
OPTICAL DATA Optical characteristics
Tamb = +22 r 3 C; elapsed time from switch-on is greater than 45 minutes; driving conditions are typical values unless otherwise specified. Measurements are made perpendicular to the panel unless otherwise specified SYMBOL L CRmax PARAMETER luminance CONDITIONS I(RMS) = 6.0 mA; note 1. MIN. 300 TYP. 350 MAX. UNIT Cd/m2
maximum contrast ratio At optimum viewing angle; note 1 viewing angle:
A2uvhyAvght A2uvhyAyrs A2rvphyA A2rvphyAq
100 : 1 200
CR>5; note 1 60 60 45 45 rise time fall time 70 70 50 70 30 15 deg deg deg deg ms ms
tres
average response time
color coordinates: xW yW xR yR xG yG xB yB
opt
peak white; note 2 0.265 0.280 0.557 0.274 0.263 0.523 0.122 0.071 0.315 0.330 0.607 0.324 0.313 0.573 0.147 0.121 3 0.365 0.380 0.657 0.374 0.363 0.623 0.172 0.171 deg
white white red red green green blue blue Optimum viewing angle A2!& (6 o'clock); notes.1 and (for contrast) 3
NOTES 1. Brightness control input (BRT) open circuit 2. No dimming 3. Customer is advised to use the display in the 12 o'clock direction
- 14 -
Philips Flat Display Systems Active matrix 5" color TFT LCD module
Product Specification LTE052T-060
www..com
8.2
Pixel organization
8.3 Contrast ratio The contrast ratio (CR) is the ratio between the transmission (W) in a full white area (R = G = B = 1) and the transmission (Wd) in a dark area (R = G = B = 0): CR = W / Wd
8.4 Response time Response time (tres) is the mean of rise time (tr) and fall time (tf): tres = ( tr + tf ) / 2 Rise time is the time for luminance to change from 10% to 90% as a result of a change of electrical condition, fall time is the time for luminance to change from 90% to 10% as a result of a change of electrical condition.
8.5
Viewing angle
- 15 -
Philips Flat Display Systems Active matrix 5" color TFT LCD module
Product Specification LTE052T-060
www..com
9 9.1
ENVIRONMENTAL DATA Environmental tests
Measurements are performed after two hours in room temperature environment; unless otherwise specified.
TEST High temperature, operating Low temperature, operating High temperature storage Low temperature storage High temperature, high humidity, operating Thermal shock UV 765 W/m
2
CONDITIONS Tpanel = +85 Tamb = " Tamb = +90 Tamb = # C for 240 hours C for 240 hours C for 240 hours C for 240 hours
METHOD IEC 60068-2-2Bb IEC 60068-2-1Ab IEC 60068-2-2Bb IEC 60068-2-1Ab IEC 60068-2-3Ca
REMARK panel surface temperature
module not operated module not operated module operating module not operated module not operated
Tamb = +60 C, RH = 90% for 240 hours Tamb = # to '$ 168 hr
C; 168 cycles IEC 60068-2-14Nb IEC 60068-2-5Sa
9.2
Mechanical tests TEST CONDITIONS 3 directions: X, Y, Z axes; 6 repeats; peak acceleration = 100 G; pulse duration = 6 ms 3 directions: X, Y, Z axes; 6 repeats; sweep time = 11 minutes; peak acceleration = 10 G; frequency = 10 to 150 Hz; amplitude = 1.5 mm peak-topeak METHOD IEC 60068-2-27Ea REMARK not operated; not packed
Shock
Vibration
IEC 60068-2-6Fc
not operated; not packed
- 16 -
Philips Flat Display Systems Active matrix 5" color TFT LCD module
Product Specification LTE052T-060
www..com
9.3 Electrostatic discharge (ESD) Under directive "89/336/EEG" conforms with "EN50082-1". 9.4 Electromagnetic (EMC) Under directive "89/336/EEG" conforms with "EN55022/B" and "EN61000-4-6". 9.5 Safety Complies with "IEC60950" 10 Handling and safety requirements
WARNING The display glass may break when it is dropped or bumped on a hard surface. Handle with care. Should the display break, do not touch the liquid crystalline material. In case of contamination with liquid crystal material, wash immediately with water and soap.
CAUTION At temperatures lower than the rated storage temperature, the liquid crystal solidifies causing permanent damage to the display. At temperatures higher than the rated storage temperature, the liquid crystal turns into an isotropic liquid and may not recover. The display module should not be exposed to harmful gases, such as acid and alkali gases, which corrode electronics components. Disassembling the display module can cause permanent damage and invalidates the warranty agreements. Observe general precautions that are common to handling delicate electronic components. The glass can break and polarizers can easily be damaged. Moreover the display is sensitive to static electricity and other rough environmental conditions.
11
MOUNTING
CAUTION Allow enough space at the back of the module for sufficient airflow to disperse heat generated by the backlighting system.
12 DEFINITIONS Data sheet status Objective specification Preliminary specifications
Product specification Limiting values Limiting values given are in accordance with the absolute Maximum Rating System (IEC 60134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended periods may affect device reliability Application information Where applications information is given, it is advisory and does not form part of the specification. - 17 -
This data sheet contains target or goal specifications for product development This data sheet contains preliminary data; supplementary data may be published later. This data sheet contains final product specification
Philips Flat Display Systems Active matrix 5" color TFT LCD module
Product Specification LTE052T-060
www..com
Philips Flat Display Systems Company Sales Offices
Philips Flat Display systems
Jan Campertstraat 5 6416 SG Heerlen The Netherlands Tel +31 45 5437 750 Fax +31 45 5437 780
Philips Flat Display Systems
3200 North First Street San Jose, CA, 95134 USA Tel. +1 408 570 5600 Fax +1 408 570 5700
- 18 -
1. SCOPE
www..com This Quality Description Sheet applies to all versions of the Active Matrix Liquid Crystal Display Module type number LTE052T-060 (hereinafter called the Module), supplied by Philips Flat Panel Display Co. (PFPD) B.V. to the Customer or an agent of the Customer.
2. Conformance to specification
Conformance to specification regarding visual defects is guaranteed by a 100% final inspection and by a lotrelease based on a sampling inspection with zero defects. With regard to parametric specifications the PFPD Quality Assurance monitoring system will apply.
3. Inspection conditions and test patterns
Item Lighting Temperature Driving Conditon Conditons Fluorescent light (Day-Light Type) Display Surface illumination to be 500 1000 Lux.
!$AU8A-A$U8
Equipment Test pattern Supply voltage inspection time
Customer controller or PFPD original controller Black, White, R, G, B typical supply voltages given in commercial specification d 1 minute
Remarks:
Inspect at 20 inches from display. Defects that are not noticed within 1 minute shall be ignored. Standard Viewing angle of the inspection shall be perpendicular to the display surface. Inspection at other viewing angles shall not exceed the range of specified viewing angle.
4. VISUAL DEFECT CRITERIA
The defect categories covered in this QDS are comprised of defects in the active display area such as dot defects, blemishes and partly or completely malfunctioning displays as well as the visual appeareance of the complete product and the packing of the product. The different defect categories are described below.
KH
COMPANY RESTRICTED General Quality Description Sheet A 99-01-25 Active Matrix Liquid Crystal Display Module 4322 252 32890 LTE052T-06x* family Supp. vers. 2.2 99-01-25 4 367 1 EN --A4 PHILIPS ELECTRONICS N.V. 1999
KONINKLIJKE
4.1 Dot and Line defects inspection specifications.
4.1- 1 Count with the following display pattern
www..com
a) b) c) d) e)
Black pattern White pattern R pattern G pattern B pattern
4.1- 2 Acceptable number of defects Item Dot defect Line defect Bright defect Dark defect R 2 G 1 4 0 B 3 6 Total Number inspection pattern (a) (e) Total of (c) (d) (e) (a) (b) (c) (d) (e)
4.2
Blemishes, cosmetic anomalies inspection specifications.
Black border
Active area Active area dimensions: see product specification Black border: rim between active area and metal front cover 4.2.1 Circular defects Size (mm) D d 0.15 0.15 D d 0.20 0.20 < D d 0.31 0.31 < D D = (Length + Width ) / 2 Acceptable number Active area Black border No count 3 No count 1 0
W L
KH
COMPANY RESTRICTED General Quality Description Sheet A 99-01-25 Active Matrix Liquid Crystal Display Module 4322 252 32890 LTE052T-06x* family Supp. vers. 2.2 99-01-25 4 367 2 EN --A4 PHILIPS ELECTRONICS N.V. 1999
KONINKLIJKE
4.2.2 Long defects Size (mm) T d 0.03 0.03 < T d 0.08 0.03 < T d 0.08 0.03 < T d 0.08 0.08 < T T = defect thickness L = defect contour length T L d 2.0 2.0 < L d 3.0 3.0 < L Acceptable number Active area No count No count 1 0 0 No count Black border
www..com
L
4.2.3 Pinholes Black border only. Size (mm) D d 0.15 0.15 < D D = diameter
Acceptable number Black border No count 0
4.2.4 Color blemishes If applicable shall not exceed the accepted limit sample.
4.3 Malfunctioning
Not allowed are: - Malfunctioning display: no picture, distinct block or line failure. - Malfunctioning backlight. - Excessive start up time (> 3 sec.)
KH
COMPANY RESTRICTED General Quality Description Sheet A 99-01-25 Active Matrix Liquid Crystal Display Module 4322 252 32890 LTE052T-06x* family Supp. vers. 2.2 99-01-25 4 367 3 EN --A4 PHILIPS ELECTRONICS N.V. 1999
KONINKLIJKE
4.4
Appearance
www..com
Not allowed are:
Type/serial number wrong, missing or not legible. Offensive surface damage. Connectors damaged. Stains within active area, such as finger prints or adhesive residues. Dirty appearance (can not be removed with a dry cloth).
4.5 Packing
Not allowed are: - Box damaged, wet, badly taped or stapled causing the product not to arrive in good condition at the Customer. - Type or model number wrong, missing or not legible.
KH
COMPANY RESTRICTED General Quality Description Sheet A 99-01-25 Active Matrix Liquid Crystal Display Module 4322 252 32890 LTE052T-06x* family Supp. vers. 2.2 99-01-25 4 367 4 EN --A4 PHILIPS ELECTRONICS N.V. 1999
KONINKLIJKE
The specification of the LTE502T-9197-1 is based on the specification of the LTE052T-060. The General Quality Description Sheet of the LTE052T-06* family is valid for the LTE502T-9197-1. www..com The LTE502T-9197-1 product is almost equal to the LTE052T-060 product, exceptions are: - Pin 22 of the interface connector became possible pixel clock output - Mechanical drawing updated.
Details of the deviations are list as follows:
1. Section 6 Pinning for electrical interface: Pin 22 was changed to pixel clock I/O pin.
PIN 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 1 2 I/O I/O I/O O I I I I I I I I I I I I I I I I/O I I DESCRIPTION Horizontal sync; notes 1 and 2 Vertical sync; notes 1 and 3 Synchronization signal for backlight PAL/NTSC control signal, note 8 Horizontal scanning direction; note 4 Vertical scanning direction note 5 RGB1/ RGB2 video signal switching; note 6 Not connected Not connected Supply voltage VBS input for sync separator Brightness control Red video signal 1 Green video signal 1 Blue video signal 1 Not connected Red video signal 2 Green video signal 2 Blue video signal 2 Ground Change I/O direction of CLK, Hs and Vs; note 7 Clock signal Backlight input voltage Backlight ground connection
SYMBOL Analog interface Hs Vs PWM P/N HRV VRV Vsw n.c. n.c. VDD VBS BRT R1 G1 B1 n.c. R2 G2 B2 GND CLKC CLK Backlight Vin GND
NOTES 1 2 3 4 5 6 CLKC= LOW: module is activated by CLK, Hs and Hs. CLKC = HIGH: Hs is output, synchronised to VBS signal CLKC = LOW: Hs is horizontal sync input. CLKC = HIGH: Vs is output, synchronised to VBS signal CLKC = LOW: Vs is vertical sync input. HRV = HIGH: image is normal HRV = LOW: image is reversed into horizontal direction. VRV = HIGH: image is normal VRV = LOW: image is reversed into vertical direction. Vsw = HIGH: RGB1 is selected Vsw = LOW: RGB2 is selected
Leo Chow QJ
COMPANY RESTRICTED Commercial Specification A 05-10-27 Active Matrix 5" colour TFT LCD Module 9360 307 56112 A 05-12-13 LTE502T-9197-1 06-02-16 05-10-24 1 190 -1 EN --A4 PHILIPS ELECTRONICS N.V. 2005
KONINKLIJKE
7 8
A
CLKC = HIGH : CLK, Hs and Vs become output mode CLKC = LOW: CLK, Hs and Vs become input mode P/N switching when not operating
www..com
2. Section 7.4
Characteristics: Merge "Hs, Vs, PWM" and "CLK" into one related item.
GND = 0 V; Tamb = -30 to + 70 C; unless otherwise stated.
SYMBOL DESCRIPTION CONDITIONS MIN. TYP. MAX. UNIT
HS, VS, CLK, VSW VIH VIL
HIGH-level input voltage LOW-level input voltage 3.5 1.5 V V
P/N, VRV, CLKC, HRV
VIH VIL
HIGH-level input voltage LOW-level input voltage
2.0 0.8
V V
HS, VS, PWM, CLK VOH VOL
CLK, HRV HIGH-level output voltage LOW-level output voltage
IOH = -4 mA IOL = +4 mA
2.4 0.4
V V
IIH IIL
HIGH-level input current LOW-level input current
VI = + 5 V VI = 0V
-0.1
+0.1
A A
-4.5
HS, P/N, VS, VRV, CLKC IIH IIL
VSW HIGH-level input current LOW-level input current
VI = +5 V VI = 0 V
+10
A A
-200
IIH
HIGH-level input current LOW-level input current
VI = +5 V VI = 0 V
+10
A A
-600
R, G, B, VSW, VBS CI
input capacitance f = 1 MHz 28 pF
P/N, HRV, VRV, CLK, PWM, HS, VS CI CLKC Cl
input capacitance input capacitance
f = 1 MHz
37
pF
f = 1 MHz
10
nF
Leo Chow QJ
COMPANY RESTRICTED Commercial Specification A 05-10-27 Active Matrix 5" colour TFT LCD Module 9360 307 56112 A 05-12-13 LTE502T-9197-1 06-02-16 05-10-24 1 190 -2 EN --A4 PHILIPS ELECTRONICS N.V. 2005
KONINKLIJKE
3. Section 5
Mechanical Data:
www..com
Leo Chow QJ
COMPANY RESTRICTED Commercial Specification A 05-10-27 Active Matrix 5" colour TFT LCD Module 9360 307 56112 A 05-12-13 LTE502T-9197-1 06-02-16 05-10-24 1 190 -3 EN --A4 PHILIPS ELECTRONICS N.V. 2005
KONINKLIJKE

▲Up To Search▲

Price & Availability of LTE052T-060

	To Download LTE052T-060 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .